KETT FD-800 Infrared Moisture Determination

KETT FD-800 Infrared Moisture Determination Balance KETT FD-800 employs a dual temperature sensing method to achieve highly precise moisture measurements. In addition to the thermistor that measures the environment temperature within the drying chamber, it is mounted with a radiation thermometer that measures the sample temperature directly without contact. Ï Specifications FD-800 Measurement method Detection of weight loss by heating & drying Sample mass 0.1-120g ( optional weight sampling) Measurement subject Moisture / Solid content / Weight Measurement range 0-100% ( wet base, solids) ; 0-500% ( dry base) Repeatability ( standard deviation) Sample with a weight of 5g or higher : 0.05% Sample with a weight of 10g or higher : 0.02% ) Resolution Moisture percentage 0.01% / 0.1% ; Weight 1 mg Temperature setting range for thermistor ( T1) : 30 - 180° C ( 1° C interval) ; for radiation thermometer ( T2) 30 - 250° C ( 1° C interval) Measurement modes Automatic stop mode, Timer stop mode, Rapid drying mode, Equilibrium drying mode, Step drying mode, Predictive ( comparative) measurement mode External output RS-232C interface Environmental conditions Temperature 5~ 40° C , Humidity : max of 85% RH Pollution degree 2 , Altitude up to 2000m Sample dish SUS ( diameter 130 mm, depth 13 mm) Heat source Mid-wave infrared quartz heater ( 200Wx2) Power source AC100~ 120V / 220~ 240V ( 50/ 60Hz) Power consumption Max 900W Dimensions & weight 220( W) x415( D) x190( H) , 4.5kg , Shipment 310( W) x580( D) x400( H) , 10kg Accessories Spare sample pan, Aluminum sheets, etc Options Printer Set ( VZ-330, Printer Cable: VZC-14) 10x Printer paper rolls, 500x Aluminum sheets Radiation thermometer calibration kit GF-200 ( digital thermometer, standard heating sample) , FD- 800 Data logger software FDL-01 ( RS-232C cable, USB-RS232C conversion cable) , Windshield with deodorizer case FW-100 catalog